SCR BATTERY CHARGERS

Our SCR chargers are fully automatic and
microprocessor controlled.  Operation is simple; just
make the battery connection, plug the charger into the
wall outlet and switch it on.

These chargers are programmed for use with flooded
(wet) lead acid cyclic batteries.  Profiles are also
available for starting batteries on special order.

The following are standard outputs:
12V-12amp
24V-10amp
24V-12amp
24V-15amp
24V-20amp
24V-25amp
24V-30amp
36V-22amp
36V-25amp

Other voltage/current combinations are available.
CBN 1 Series
CBN 2 Series
COMPACT SWITCHING CHARGERS

Our newest switching chargers are microprocessors and
mosfet technology to provide precise charging with
virtually pure DC output

There are 2 models in the range.  Both are equipped
with charging algorithms for flooded (wet) and gel/agm
profiles.

The following are standard units:
12/24V - 4 amp
12/24V - 8 amp

Other voltage/current configuration and charging
algorithms are available on special order.     
CBHD1 12/24V-4
CBHD1 12/24V-8
HIGH FREQUENCY CHARGERS

Our high frequency chargers use microprocessors and
mosfet technology to provide precise charging with
virtually pure DC output.  Operation is simple and
automatic.

While the charger is operating, data such as charge
current, voltage, elapsed time, charge supplied (in Ah's)
and energy absorbed by the battery (in KWh) is
available on the display.

These models are programmable for various voltages
and current outputs as well as charging algorithms.

High frequency chargers can be used with flooded (wet)
batteries and are highly recommended for gel and agm
battery technologies.

The following are standard outputs:
12V - 4, 8, 10, 12, 15, 20, 25, 30amp
24V - 4, 8, 10, 12, 15, 20, 25 or 30amp
36V - 15, 20 or 25amp
48V - 15 or 20amp

Other voltage/current configuration are available on
special order.     
CBSW1-S Series
CBSW2-S Series
SPECIAL ORDER HIGH FREQUENCY CHARGERS

We also offer higher output chargers.

The following are outputs are available in the CBSW4-S
range:

12V -40amp
24V -40, 50 or 60amp
36V -30, 40 or 60amp
48V -30 or 60amp

Input: 230V

The following are outputs are available in the CBSW6-S
range:

24V - 80 or 100amp
36V - 80 or 100amp
48V - 60 or 80 or 100amp
72V - 80amp
80V - 80amp

Input: 440V, 3 phase
CBSW4-S Series
CBSW6-S Series


BT Products